Publications

Publications in 2014

Ref.#Description
772 Eberhardt, W.; Ermantraut, E; Gadow, R.; Kern, F.; Kück, H.; Landfried, R.; Müller, H.; Sommer, F.
„Finest Conductor Paths on Injection Moulded Ceramic Substrates“
Proceedings of the 14th European Inter-Regional Conference on Ceramics; Shaker Verlag, Aachen, 2014 ISBN 978-3-8440-2975-8
770 Weber, S; Sommer, F.; Kern, F.; Gadow, R.; Voggenreiter, H.; Koch, D.
„Thermoplastic Forming as an Alternative Shaping Process for Near-Net-Shape Production of C-SiSiC Ceramics via Liquid Silicon Infiltration (LSI) Process“
Journal of Ceramic Science and Technology, 05 [03] pp. 223-236, 2014
DOI:10.4416/JCST2014-00011
769 Kern, F.; Palmero, P.; García Marro, F.; Mestra, A
„Processing of alumina-zirconia composites by surface modification route with enhanced hardness and wear resistance“
Ceramics International;
DOI:10.1016/j.ceramint.2014.09.006
756 Gadow, R.; Kern, F.; Lombardi, M; Montanaro, L.; Palmero, P.; Sommer, F.
„Issues in nanocomposite ceramic engineering: focus onprocessing and properties of alumina-based composites“
Journal of Applied Biomaterials & Functional Materials, 2014
DOI:10.5301/jabfm.5000185
753 Gadow, R.; Kern, F.; Menzel, U.; Platz, S.; Vogel, A.; Vu, T.P.
„Characteristics of an electrocoagulation - electroflotation process in separating powdered activated carbon from urban wastewater effluent“
Separation and Purification Technology 134, 196-203, 2014
DOI: 10.1016/j.seppur.2014.07.038
739 Kern, F.
„Effect of In Situ-Formed Cerium Hexaaluminate Precipitates on Properties of Alumina -24 Vol% Zirconia (1.4Y) Composites“
Journal of Ceramic Science and Technology, 2013
DOI:10.4416/JCST2013-00014
738 Kern, F.
„A comparison of microstructure and mechanical properties of 12Ce-TZP reinforced with alumina and in situ formed strontium- or lanthanum hexaaluminate precipitates“
Journal of the European Ceramic Society, 34, pp. 413-423, 2014
DOI:10.1016/j.jeurceramsoc.2013.08.037
734 Gadow, R.; Weichand, P.
„SiOC Composite Structures for Intermediate Service Temperatures with Increased Friction Properties“
Advances in Science and Technology, Volume 88, pp 15-20, Trans Tech Publications, 2014
DOI: 10.4028/www.scientific.net/AST.88.15
732 Gadow, R.; Kern, F.; Landfried, R.
„Influence of Titanium Carbide Fraction on Material Properties and EDM of ZrO2-TiC ceramics“
Key Engineering Materials, Vols. 611-612 (2014), pp 637-642, Trans Tech Publications, 2014
DOI:10.4028/www.scientific.net/KEM.611-612.637
728 Gadow, R.; Weichand, P.
„Novel intermediate temperature ceramic composites, materials and processing for siloxane based Basalt fiber composites“
Key Engineering Materials, Vols. 611-612 (2014), pp 382-390, Trans Tech Publications, 2014
DOI: 10.4028/www.scientific.net/KEM.611-612.382
725a Martínez-García, V.; Wenzelburger, M.; Killinger, A.; Pedrini, G.; Gadow, R.; Osten, W.
„Residual Stress Measurement with Laser-Optical and Mechanical Methods“
Advanced Materials Research 996, 256–261, 2014
DOI: 10.4028/www.scientific.net/AMR.996.256
686 Gadow, R.; Kern, F.; Maetzig, M.; Sommer, F. Walcher, H.
„Influence of feedstock preparation on ceramic injection molding and microstructural features of zirconia toughened alumina“
Journal of the European Ceramic Society, 34 (2014), 745-751
DOI:10.1016/j.jeurceramsoc.2013.09.020

Publications in 2013

Ref.#Description
739 Kern, F.
„Effect of In Situ-Formed Cerium Hexaaluminate Precipitates on Properties of Alumina -24 Vol% Zirconia (1.4Y) Composites“
Journal of Ceramic Science and Technology, 2013
http://dx.doi.org/10.4416/JCST2013-00014
711 Gadow, R.; Manzat, A.
„Untersuchungen zum tribologischen Verhalten von thermischen Spritzschichten“
54. Tribologie-Fachtagung (GfT) - Reibung, Schmierung und Verschleiß, pp 68/1-68/11, 2013
ISBN 978-3-00-043026-8
694 Kern, F.
„Ytterbia–neodymia–costabilized TZP—Breaking the limits of strength–toughness correlations for zirconia?“
Journal of European Ceramic Society, 33, pp 965-973, 2013
685 Gadow, R.; Heisel, U.; Kern, F.; Sommer, F.; Talpeanu, D.
„Medium Density Fiberboard machining and wear behavior of injection molded ceramic composite wood cutting tools“
Journal of Applied Ceramic Technology, 1-10 (2013)
DOI:10.1111/ijac.12144
684 Gadow, R.; Kern, F.; Sommer, F.
„Injection molding of ceramic cutting tools for wood-based materials“
Journal of the European Ceramic Society, 33 (2013), 3115-3122
DOI:10.1016/j.jeurceramsoc.2013.05.012
676 Gadow, R.; Haas, R.; Kern, F.; Landfried, R.; Munz, M.; Risto, M.
„Machinability of ZTA-TiC Ceramics by Electrical Discharge Drilling“
Procedia CIRP, Proceedings of the Seventeeth Conference on Electro Physical and Chemical Machining (ISEM), Volume 6, Pages 77-82, 2013
http://dx.doi.org/10.1016/j.procir.2013.03.022
674 Gadow, R.; Kern, F.; Landfried, R.
„Electrical Discharge Machining of Alumina-Zirconia-Composites (AZC) with Addition of Titanium Carbide“
Key Engineering Materials, Trans Tech Publications, Vols. 554-557, 2013
537 Floristán, M.; Gadow, R.; Killinger, A.
„Overview on development functional plasma sprayed coatings on glass and glass ceramic substrates“
Key Engineering Materials, Trans Technical Publication, Switzerland, Vol. 533, pp 115-131, 2013
http://dx.doi.org/10.4028/www.scientific.net/KEM.533.115

Publications in 2012

Ref.#Description
704 Kern, F.
„Ytterbia-Neodymia Costabilized Zirconia-Alumina Nanocomposites“
Journal of Ceramic Science and Technology, 3 [4], pp. 189-198, 2012
http://dx.doi.org/10.4416/JCST2012_00021
691 Kern, F.
„Structure–property relations in alumina–zirconia nanocomposites reinforced with in situ formed cerium hexaaluminate precipitates“
Scripta Materialia, Elsevier, 67 (2012), pp. 1007-1010
http://dx.doi.org/10.1016/j.scriptamat.2012.09.019
668 Kern, F.
„High toughness and strength in yttria neodymia costabilized zirconia ceramics“
Scripta Materialia, Elsevier, 67 (2012) 301-304
http://dx.doi.org/10.1016/j.scriptamat.2012.05.009
665 Gadow, R.; Kern, F.
„Alumina toughened zirconia from yttria coated powders“
Journal of the European Ceramic Society, 32 (2012), pp. 3911-3918
doi:10.1016/j.jeurceramsoc.2012.03.014
653 Abu El-Ezz, M.; Awaad, M.; El-Maghraby, H.; Gadow, R.; Naga, S.; Sommer, F.; Wael, E.
„Fabrication, Microstructure and Properties of Hot- Pressed Nd:YAG Ceramics“
Journal of Ceramic Science and Technology, 3 [1], pp. 35-40, 2012
http://dx.doi.org/10.4416/JCST2012-00043
651 Abu El-Ezz, M.; Awaad, M.; El-Maghraby, H.; Gadow, R.; Kern, F.; Naga, S.; Sommer, F.
„Effect of preparation route on the properties of slip-casted Al2O3/YAG composites“
Ceramics International, 38 (2012), pp. 4819-4826
http://dx.doi.org/10.1016/j.ceramint.2012.02.070
649 Kern, F.
„Gadolinia-Neodymia-Co-Stabilized zirconia materials with high toughness and strength“
Journal of Ceramic Science and Technologie, Göller Verlag, (2012)
DOI: 10.4416/JCST2012-00004
646 Burger, W.; Gadow, R.; Kern, F.; Landfried, R.
„Wire-EDM of ZTA-TiC composites with variable content of electrically conductive phase“
Key Engineering Materials, Trans Tech Publications, Vols. 504-5046, pp 1165-1170, 2012
DOI:10.4028/www.scientific.net/KEM.504-506.1165
630 Bernstein, A.; Gadow, R.; Killinger, A.; Mayr, H.O.; Suedkamp, N. and Stiegler, N.
„Investigations on vitro behaviour of ceramic coatings deposited by high velocity suspension flame spraying (HVSFS)“
Key Engineering Materials 493 - 494, pp 530 - 534, 2012
621 Gadow, R.; Kern, F.; Landfried, R.; Sommer, F.
„Mechanical Properties of Zirconia Toughened Alumina with 10-24 vol-% 1Y-TZP Reinforcement“
Journal of the European Ceramic Society, 32 (2012) 4177-4184
http://dx.doi.org/10.1016/j.jeurceramsoc.2012.06.019
620 Burger, W.; Gadow, R.; Kern, F.; Landfried, R.
„Development of electrical discharge machinable ZTA-based ceramics with 24 vol% of TiC,TiN,TiCN,TiB2 and WC as electrically conductive phase“
Journal of Applied Ceramic Technology, American Ceramic Society, 1-10, 2012
DOI:10.1111/j.1744-7402.2012.02756.x
611 Gadow, R.; Kern, F.
„Ytterbia (2.25 mol.-%) stabilised zirconia (Yb-TZP) manufactured from coated nanopowder“
Advances in Applied Ceramics, spezial issue on Novel Advanced Caramic and Coating Processing, Vol. 111, no 5&6, pp. 275-279, 2012
613 Bellucci, D.; Bolelli, G.; Cannillo, V.; Gadow, R.; Killinger, A.; Lusvarghi, L.; Sola, A.; Stiegler, N.
„High Velocity Suspension Flame Sprayed (HVSFS) potassium-based bioactive glass coatings with and without TiO2 bond coat“
Surface and Coatings Technology, Elsevier, 206, pp. 3857-3868, 2012
604 Gadow, R.; Kern, F.; Landfried, R.; Sommer, F.
„Mechanical Properties of Zirconia Toughened Alumina with 10-24 vol.% 1.5 mol% Y-TZP Reinforcement“
Journal of European Ceramic Society, 32 (2012) 3905-3910
http://dx.doi.org/10.1016/j.jeurceramsoc.2012.02.057
603 Gadow, R.; Kern, F.
„Alumina toughened zirconia composites manufactured from yttria coated zirconia powders“
Journal of European Ceramic Society, Elsevier, 32, pp 3911-3918, 2012
doi:10.1016/j.jeurceramsoc.2012.03.014

Publications in 2011

Ref.#Description
647 Kern, F.
„Sintering conditions, microstructure and properties of alumina 10 vol-% zirconia nanocomposites“
Journal of Ceramic Science and Technology, 3 [1], pp. 61-88, 2011
DOI: 10.4416/JCST2011-00036
644 Abou el Ezz, M.; Gadow,R.; Kern, F.
„Ageing Behavior of Injection-Molded ZTA Ceramics as a Function of Stabilizer Content“
Journal of Ceramic Science and Technology, 2 [4], pp. 191-196, 2011
DOI: 10.4416/JCST2011-00025
634 Balàzsi, C.; Gadow, E.; Kern,F.; Markó, M. ; Tapasztó, L. ; Tapasztó, O.
„Dispersion patterns of graphene and carbon nanotubes in ceramic matrix composites“
Chemical Physics Letters, Vol 511 Issue: 4-6 Pages: 340-343, 2011,
doi:10.1016/j.cplett.2011.06.047
618 Kern, F.
„2.75Yb-TZP ceramics with high strength and aging resistance“
Journal of Ceramic Science and Technology, Vol.2, No.3, Pages 147-154, 2011
DOI: 10.4416/JCST2011-0002
607 S. Johansson, C. Frennfelt, A. Killinger, P.H. Nilsson, R. Ohlsson, B.G. Rosén
„Frictional evaluation of thermally sprayed coatings applied on the cylinder liner of a heavy duty diesel engine: Pilot tribometer analysis and full scale engine test“
Wear, Elsevier B.V., 273, pp 82-92, 2011
605 Gadow, R.; Kern, F.; Landfried, R.
„Erodierbare Hochleistungskeramik für den Werkzeug- und Formenbau“
Konstruktion- Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, Springer VDI Verlag, IW10-11, September 9-2011
602 Gadow, R.; Kern, F.
„Modellgestützte Auslegung von Entbinderungs- und Sinterprozessen im Keramischen Spritzguß“
22. Stuttgarter Kunststoff-Kolloquium, Stuttgart, 16.17. März 2011,
ISBN 978-3-00-034152-6, 2/V6
601 Gadow, R.; Kern, F.; Landfried, R.
„Erodierbare Hochleistungskeramiken für hochverschleißfeste Spritzgieß- und Extrusionswerkzeuge“
22. Stuttgarter Kunststoff-Kolloquium, Stuttgart, 16.17. März 2011,
ISBN 978-3-00-034152-6, 2/V8
600 Kern, F.
„Alumina-Doped 2.5Y-TZP produced from Yttria-Coated pyrogenic Nanopowder“
Journal of Ceramic Science and Technology Vol. [2], No. 2, (2011) Pages 89-96,DOI: 10.4416/JCST2011-00001
598 Gadow, R.; Killinger, A.; Müller, P.
„High Velocity Suspension Flame Spraying of nano oxide containing suspensions“
DVS-Berichte, Vol. 276, ITSC 2011, International Thermal Spray Conference and Exhibition,
27.-29. September 2011, Hamburg, DVS-Media, Lectures and Posters
597 Gadow, R.; Killinger, A.; Manzat, A.
„Supersonic Flame Spraying of Cylinder Liner Coatings and the Benefits of their Intrinsic Porosity“
DVS-Berichte, Vol. 276, ITSC 2011, International Thermal Spray Conference and Exhibition,
27.-29. September 2011, Hamburg, DVS-Media, Lectures and Posters
596 Gadow, R; Killinger, A.; Rempp, A.; Widmann, M.
„New Approach to Ceramic / Metal - Polymer Multilayered Coatings for high Performance Dry Sliding Applications“
DVS-Berichte, Vol. 276, ITSC 2011, International Thermal Spray Conference and Exhibition,
27.-29. September 2011, Hamburg, DVS-Media, Lectures and Posters
595 Gadow, R.; Killinger, A.; Müller, P.; Floristán, M.; Cardella, A.; Li, C.
„Development and Characterization of Oxide Ceramic APS Coatings for Microwave Absorption“
DVS-Berichte, Vol. 276, ITSC 2011, International Thermal Spray Conference and Exhibition,
27.-29. September 2011, Hamburg, DVS-Media, Lectures and Posters
591 Gadow, R.; Kern, F.; Smirnov, A.; Bartolomé J.F.; Moya, J.S.
„Dry reciprocating sliding wear behaviour of alumina-silicon carbide nanocomposite fabricated by ceramic injection molding“
Journal of the European Ceramic Society, 31 (2011), ELSEVIER Verlag, pp. 469-474,
doi:10.1016/j.jeurceramsoc.2010.11.003
590 Gadow, R.; Kern, F.; Lombardi, M.; Montanaro, M.; Palmero, P.
„Role of immiscible and miscible second phases on the sintering kinetics and microstructural development of nano-crystalline a-Al2O3 -based materials“
Ceramics International, 37 (2011), ELSEVIER Verlag, pp. 3547-3556,
doi:10.1016/j.ceramint.2011.06.011
587 Gadow, R.; Killinger, A.; Mauer. G.; Guignard, A.; Vaßen, R; Stöver, D.
„Review on New Developments in Suspension and Solution Precursor Thermal Spray Processes“
Journal of Thermal Spray Technology, ASM international, 2011,
DOI: 10.1007/s11666-011-9639-8
580 Stiegler, N.; Gadow, R.; Killinger, A.
„High velocity suspension flame sprayed (HVSFS) hydroxyapatite coatings for biomedical applications“
Advanced Ceramic Coatings and Materials for Extreme Environments: Ceramic Engineering and Science Proceedings 32 [3]; Ed.: Dongming Zhu, Hua-Tay Lin , Yanchun Zhou, Wiley, 2011, ISBN: 978-1-1180-5988-3, pp 25-35
570 Floristán, M.; Gadow, R.; Gebhardt, A.; Müller, P.; Killinger, A.; Cardella, A.; Li, C.; Stadler, R.; Zangl, G.; Hirsch, M.; Laqua, H. P.; Kasparek, W.
„Development and testing of a 140 GHz absorber coating for the water baffle of W7-X cryopumps“
Fusion Engineering and Design, Vol. 86, pp. 1847-1850, 2011,
doi:10.1016/j.fusengdes.2010.12.015
567 Kern, F.
„Influence of in-situ platelet reinforcement on the properties of injection molded alumina toughened zirconia“
Journal of Ceramic Science and Technology, Vol.2 [1], (2011) pp. 47-54
559 Kern, F.
„Microstructure and mechanical properties of hot pressed alumina - 5 vol-% zirconia nanocomposites“
Journal of Ceramic Science and Technology, Vol.2 [1], (2011) pp. 69-74
554 Gadow, R.; Kern, F.; Övecoglu, M.L.; Ünal, N.
„Influence of WC particles on the microstructural and mechanical properties of 3 mol% Y2O3 stabilized ZrO2 matrix composites produced by hot pressing“
Journal of the European Ceramic Society, , 31 [13], (2011), ELSEVIER Verlag, pp. 2267-75,
doi:10.1016/j.jeurceramsoc.2011.05.032
553 Gadow, R.; Kern, F.; Övecoglu, M.L.; Ünal, N.
„Optimization of processing conditions and characterization investigations of ceramic injection molded and sintered ZrO2/WC composites “
Journal of Alloys and Compounds, Vol. 509, 2011, pp. 4797-4804
545 Altomare L.; Bellucci D.; Bolelli G.; Bonferroni B.; Cannillo V.; De Nardo L.; Gadow R.; Killinger A.; Lusvarghi L.; Sola A.; Stiegler N.
„Microstructure and in-vitro behaviour of 45S5 bioglass coatings deposited by High Velocity Suspension Flame Spraying (HVSFS)“
J Mater Sci: Mater Med 22 [5], pp 1303-1319, 2011
531 Gadow, R.; Kern, F.; Sommer, F.
„Injection Molding of Alumina-Chromia-Yttria Composites“
Journal of Ceramic Science and Technology, Vol.2 [4], (2011) pp. 211-216
http://dx.doi.org/10.4416/JCST2011-00035

Publications in 2010

Publications in 2009

Publications in 2008

Publications in 2007

Publications in 2006