This picture showsAndrea Gommeringer


Andrea Gommeringer

Scientific employee



Allmandring 7b
70569 Stuttgart
Room: 1.43

Office Hours

  • by arrangement


  • Material Science in ED-machinable ceramics and co-doped zirconia
  • Phase Analysis by X-Ray Diffraction.

P-992: BERGS, T; OLIVIER, M.; GOMMERINGER, A.; KERN, F.; KLINK, A.: Surface Integrity Analysis of Ceramic Machined by Wire EDM Using Different Trim Cut Technologies. In: Procedia CIRP 87 (2020), DOI: 10.1016/j.procir.2020.02.026. 

P-1043: GOMMERINGER, A.; KERN, F.: Mechanical Properties and Electrical Discharge Machinability of Alumina-10 vol% Zirconia-28 vol% Titanium Nitride Composites. In: Ceramics (3)2 (2020), DOI: 10.3390/ceramics3020018. 

P-1029: GOMMERINGER, A.; SCHWEIZER, C.; KERN, F.; GADOW, R.: Elelctrical discharge machinable (Y, Nd) co-stabilized zirconia - Niobium carbide ceramics. In: Journal of the European Ceramic Society (2019), DOI: 10.1016/j.jeurceramsoc.2019.11.004. 

P-998: GOMMERINGER, A.; NÖLLE, L.; KERN, F.; GADOW, R.: Yttria Ceria Co-Stabilized Zirconia Reinforced with Alumina and Strontium Hexaaluminate. In: Appl. Sci. 9 (2019), Nr. 4, DOI: 10.3390/ceramics1010004. 

P-947: GOMMERINGER, A.; KERN, F.; GADOW, R.: Enhanced Mechanical Properties in ED-Machinable Zirconia-Tungsten Carbide Composites with Yttria-Neodymia Co-Stabilized Zirconia Matrix. In: Ceramics 1 (2018), Nr. 1, DOI: 10.3390/ceramics1010004. 

P-927: GOMMERINGER, A.; SCHMITT-RADLOFF, U.; NINZ, P.; KERN, F.; KLOCKE, F.; SCHNEIDER, S.; HOLSTEN, M.; KLINK, A.: ED-machinable ceramics with oxide matrix: Influence of particle size and volume fraction of the electrical conductive phase on the mechanical and electrical properties and the EDM characteristics. In: Procedia CIRP. 

P-925: SCHMITT-RADLOFF, U.; GOMMERINGER, A.; ASSMUTH, P.; KERN, F.; KLOCKE, F.; HOLSTEN, M.; SCHNEIDER, S.; KLINK, A.: Effects of composition on mechanical and ED-machining characteristics of zirconia toughened alumina – titanium carbide (ZTA-TiC) composite ceramics. In: Procedia CIRP.  

P-923: KERN, F.; GOMMERINGER, A.: Reinforcement mechanisms in yttria ceria co-stabilized zirconia-alumina-strontium hexaaluminate composite ceramics. In: Journal of Ceramic Science and Technology, DOI: 10.4416/JCST2017-00046.  

P-888: GOMMERINGER, A. ; SCHMITT-RADLOFF, U. ; KERN, F. ; GADOW, R.: In situ cerium hexaaluminate platelets reinforcement of ED-machinable ZTA-TiC ceramics. In: Materialy Ceramiczne 69 (2017), Nr. 1, S. 4–9. 

To the top of the page